The trout suffered a version of whirling disease while at the foundry and only half of them and two hoops could be salvaged. My meticulously formed wax trout made it through wax sprew, ceramic shell, burnout, but bronze pour blew out the sides of the ceramic shell (one of the rare places where Total Fail can occur). My last run of 10 trout and 7 hoops had no issues, this time around saw 50% mortality.
So last Friday I drove out to the foundry and we sorted through the parts that survived and grouped them out into parts that match and parts that almost match. We came up with three workable trout, and two spare heads and a tail fin. I brought the mold along and the foundry will create the wax bodies to match the heads, as well as making one entire trout. This is not the normal easy process of making identical forms by slurrying wax into a mold. The trout are all different and have to be done half by half all by hand, painting in layer by layer, with the mold slung over the curving/recurving platform, then the halves are joined. The process is posted three blogs back, or just tap the Cutthroat link on the sidebar.
OSHA has noted that vibrating tools cause irreparable nerve damage, and glove mnfctr has not really moved beyond impact protection: except for Cestus gloves. My hands go dead (can’t even ride my bicycle as my hands catch fire then go dead from road vibration) and I am on my way “white finger”. Limiting my time on-tool and these gloves should go a long way to keeping my hands alive. Handses: the key tool.
It snowed last night, and has been spitting snow all morning. This makes for a cold shop and my motivation level reached “blogging update”. Plus, chasing is the worst…