91 Degrees and tempermental fish making for temper-mental quittin’ time.

_DSC6139

Fish #3. Fit well and hadn’t suffered a wax room collapse at the foundry.

The difference between the six finished wax trout I dropped off, and what I was handed back is like working forensics from a recognizable corpse; true Frankenfish that I have to reanimate to their original quality. The problem isn’t piecing in random remains to cover the parts lost in casting, but they too may be traced back to The Crime Scene: the foundry wax room. They did 10 trout for me on the last big commission and they were all fine, this time we are 1 of 3 so far, or in actuality, 1 of 6.

_DSC6134

This is the dorsal fin from the Fish #1. See how it connects cleanly to the body with details all the way down. They biffed it a little toward the front, as some of the circles are partial, but did a fair job of touch-up. I went in and put in new circles in the bronze where I touched up their line.

_DSC6135

This is fish #3 where the wax room tried to re-affix the dorsal fin after it softened and rolled to the side, collapsing into the body. They pulled it upright and slathered in some wax. They had five other fish to look at to check their work, so going for a standard of sux. 

_DSC6136

This is their attempt on the other side of the fin. Almost worse.

_DSC6137

The horizontal fin is wrong as well. They stuck it back on- see how it had deformed the body of the fish as it torqued upward? That’s bcs the room was too hot to store finished waxes.

_DSC6142

It curves. So there’s a minimum bar met. There was an abrupt line smashing inward along one of the bisection seams from the wax room laying it on the table to attach sprews. This went unnoticed and took the medium sledge to massage back to alignment with the other section.

_DSC6143

Still a long way to go ’til they all are up to snuff. Ima gonna lose mu myund if the remaining half (of parts that cast and new parts made in wax to fit where parts failed in bronze pour) are the same, or likely worse. I may still just reject the skinny middle fish from yesterday. They are also doing an entire replacement fish; lets hope this job is done by one of their competent staff and not the sprew crew.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s